-100 lt, 200 lt, 325 lt
AISI 304 quality stainless steel
1st wall base is 2 mm and it also has 0,8 mm Ep type laser welded cooler evaporator surface that is coupled to wall.
1st wall body 1,5 mm
Isolated body 1 mm
Cooler unit is mounted from the bottom side of the tank body.
There are 1 25 W 21 d/d redactor and stainless steel mixer blade on redactor.
Isolation range has 50 mm thickness, isolated with water based, non-HCFC high density polyurethane foam material.
Product output has DN50 stainless, cleanable butterfly valve.
There is also spring cover.
There is Ø 200 mm covered product entry on the cover.
There is manual measuring scale with ‰ 3-4 sensitivity rate.
There are adjustable bolted stands under the tank.
Design that allow zero liquid to remain in the rank during discharge.
Welded sections are welded with 1st class Argon TIG welding and has 1st class smooth polishing.
Fast Cooling without crystallization within minimum milk volume
Minimum gas charging
Cooling with R404 A gas
Peymak Milk Cooling Tanks provide each milking to cool from 35°C to 4°C at
ambient temperature (32°C– 38°C)
Direct Expansion System
TSE regulation 13732 of Compliance certificate
T.C. Uluda¤ University Test of Compliance Certificate
Optionally, designs Suitable for 2, 4 and 6 milking time
Protection grade IP 65 Electric control panel
Tanks operate at 220 volt energy.
Digital thermometer heat level indicator
Electronic control card that is specially designed and is able to control the milk temperature and operation of the tank, easy utilization
Phase protection relay
System disables automatically when the cover of the tank is opened.
Automatic mixing program with special software; Mixer operation time may be adjusted with desired intervals after the milk is brought to desired ser value. (3 minutes of operation, 10 minutes of break)
Emergency cooling switch, digital level indicator